Wednesday, 1 March 2017

Evaporator valve air conditioner

The similarity of pressures is caused by the closeness of the components to each other. Two types of valves are used on machine air conditioning systems:. Thermal expansion valves are often referred to generically as metering devices. It is now extremely important for the HVAC technician to understand the design and . Live any component inside an air conditioning system, the expansion valve .

For more information about air con.

For any given operating condition , if we were to allow too much refrigerant to enter the evaporator , it would get too col and the moisture collected on it could freeze.

This would not allow the hot interior air to pass through its fins, and the refrigerant flowing inside the evaporator would not be able to absorb . In throttling devices the pressure of the refrigerant drops down suddenly and due to this its temperature also reduces drastically. The most common types of throttling . The flow is controlled by the pressure in the evaporator. This type of metering device is able to operate well when the load fluctuates and hence is suitable for use in air conditioning system.


Thermostatic expansion valve or TEV is one of the most commonly used throttling valve for the refrigerator and air conditioning systems.


The TEV automatically maintains the flow of the refrigerant inside the evaporator as per the load inside it. TEV enables safe running of the compressor without flooding and also helps the . Throttling devices are another vital parts of all the refrigeration systems and air conditioning systems apart from the compressor, condenser and the evaporator. The refrigerant leaves the compressor at high pressure and temperature and enters the condenser.


After leaving the condenser the refrigerant is at . Note: Expansion valves exist in all AC systems, even in your vehicle. Thermostatic Expansion Valves are available as parts programme, i. Air conditioner expansion valve – Ac expansion valve is the fourth component in central AC units. This is the expansion valve fitted on ship air conditioning system. An expansion valve is an AC component that is commonly found on many road going vehicles.


It is usually installed at the evaporator inlet and works together with the orifice tube to regulate the flow of refrigerant through the.


If your air conditioning ( AC ) has been less than helpful this summer, it may be the expansion valve (also known as an orifice tube). AC expansion valves regulate the flow of refrigerant through the AC system and if the valves fails they can cause problems with the whole system.

No comments:

Post a Comment

Note: only a member of this blog may post a comment.

Popular Posts