Oil condenser fan motor

How to oil an AC Condenser Unit fan ! Cheap and easy and save yourself the service call from rip-off HVAC techs! This one covers how to check and oil the fan motor on the air conditioner. I have learned in many years of service and repair. XWl If your motor has little yellow (sometimes black) removable plugs, you can o.

I just did this for my outdoor ( condenser ) fan , which was slowing down mid cycle and causing the high pressure switch to kick out.

I show where the oilers are on the blower motor of the furnace.

This video is part of the heating and cooling series of training videos made to accompany my. Cleaning lubricating oiling replacing rubber grommet on domestic refrigerator CFM. In this Packard Academy training segment, Rick explains the importance of removing drain plugs from condenser fan motors.

Condensation build-up in motors can damage bearings and other internal components. Remove one rubber end-shield drain plug from the down side of condenser fan motors . Older central air conditioner units often have fan motors that need periodic oiling. Spin the fan blade slowly by hand to disperse the oil within the motor. Watch out: Do not soak the motor in oil , do not spray the motor windings with spray oils like WD4 do not try to lubricate permanently-lubricated motors that . HVAC fan motor bearing failure - Duration: 2:14.

AC fan not working - how to troubleshoot and repair condenser fan motor - trane air condition - Duration: 9:11.

China made condenser fan motor at its finest. Kung Fu Maintenance air conditioning fan stuck, try this before replacing central fan motor. Thank you for watching, and plea.

I would replace the Condenser Fan Motor. Considering the age of your condenser unit, it is most likely bearings. Step 4: If fan has oil ports, apply several drops of 20-weight nondetergent motor oil (not all-purpose oil ) to each port at beginning of cooling season.

Step 5: If you suspect fan motor is faulty,. However, if the condenser coil must be moved to get the fan out, do not try to remove the motor. All of the condenser fan motors are also built with rugged ball bearings which.

If you own an FEA unit and it has the original condenser fan motor it probably needs oiled unless you already know how and have it running smooth.