Lutron circuit selector

Load circuits are checked for shorts and overloads and bypass jumpers are removed. Section 3: Programming the Circuit Selector. System Communications and Capacity.

One LUT-ELI-3PH unit may be used with up to. MI), specification-grade panel interfaces (SPI) or LCD controllers, Energi Savr NodeTM units, .

A maximum low-voltage ballast control current per panel.

Load Type Settings for Circuit Selector.

GRX-TVMcircuits are the first circuits in the panel. Lutron uses an airgap off for all of its products. Prewired – Cabinet comes fully assembled. No modular parts to assemble on site.

Industry standar Lutron panels have always used thermal magnetic breakers.

After start-up procedure is complete, turn off control circuit breaker(s) on normal dimmer panel(s). Turn control breaker(s) (on normal dimmer panel) back on for normal operation. Line (mains) voltage: Feed and load wiring only.

No other wiring or assembly required. DMX controller controller operates Lutron. The slide switch on the bottom of the circuit selector on the dimmer panel must be set to emergency mode (far right).

FT: Feed-through (no branch circuit breakers). Link Circuit Selector (optional).

Omit if 2-link is not required. Feed-Through Panels (without branch circuit breakers). ELV Dimming Modules work with trailing edge electronic low voltage and incandescent lighting.

Circuit selector electronically assigns circuits to zones and sources. Permits reassignment of zones and sources without rewiring. Weight: 1to 2lb (to. kg).

GP dimming panels provide power and dimming for up to 1load circuits and control any light source, including full-conduction, non-dimming.

Different feed types and breakers. For illustration purposes only. Consult model number pages for specific voltage and capacity information. Multi-channel theatrical console.

The Lutron DC dimming system offers dimming solutions tailored to the special needs of MRI rooms.

With or without branch circuit breakers. V~ Contactor XP Panels with Branch Circuit Breakers. Data link: twiste shielded pair. Power panel link must be daisy- chained (no T-taps).

Maximum of circuit selectors per link or.