The works cleaner will break up the nasties in your heater core. THE BOSCH PUMP WORKS GOOD TO CIRCULATE THE CLR AND IN ABOUT AN HOUR IT. East Lansing, MIchigan is showing how to diagn.
I knew the blend door was working also. No heat quick fix free diy - Duration: 14:17.
Ford Expedition and maybe your vehicle .
The customer complained of no heat and to do the heater core you have to remove the dash which would cost around $500.
Using this method you can flush out your heater core and restore heat to the vehicle. Flushing the radiator and Heater core on my Ford f100. Still trying to work out some kinks.
I have heat but its nowhere near what it should be.
I am pretty much convinced the heater core is plugged up to some degree. The time and expense to change the heater cor. I show in this video that you ISOLATE the core for this flush . How to Back Flush Your Heater Core . Specialized Equipment is not required.
Note: During the service procedure, the engine will have to be brought up to normal operating temperature. The flush worked but it took three flushes.
If your heat stops blowing hot, this may be your problem. And replacing the heater core can get pretty expensive. Disclaimer: This video is for information purposes only.
I am in NO WAY any sort of mechanic, nor have any sort of . Explorer, Mountaineer, Expedition. Only slightly warm air blowing and heat temperature control cable was moving freely. One heater hose was hot and the other barely warm so not flow through the heater core.
Used tap water into the heater core outlet (cold side) to get the core unplugged.
Blew it out with compressed air then let CLR soak in . My Ford Ranger did not have heat in the cab.
No comments:
Post a Comment
Note: only a member of this blog may post a comment.