Westinghouse electric motors wiring diagram

Various electrical diagrams for washing machine are available on the internet. The extra contact on the starting centrifugal switch is shown as . ALWAYS USE WIRING DIAGRAM SUPPLIED ON MOTOR NAMEPLATE. NEW ROLLED STEEL motor lines - . Note: Remove the bearing clamp before turning the shaft on 284T-449TZ frame motors.

Standard connection diagram for three phase, not thermally protecte dual rotation motors are shown in .

Check inverter and motor nameplates to determine that they have matched.

To avoid electric shock, do not take the front cover off when power is on. The motor will restart automatically after . DF format for the motor you have . Connection Diagram, Description. Ensure that the noise generated by the inverter, motor , or wiring does not adversely affect peripheral sensors. Otherwise electrical shock may result. Only authorized personnel should perform maintenance, inspection, and replacement operations.

See Instruction Manual basic connection diagram Fig. TECO - Westinghouse Motor Company. When motors are installed in good manner, ensure the wiring is according to the diagram.

Cast Iron Frame, End Brackets, Fan Cover and Terminal Box. Automatic Grease Discharge Fittings. Read this Instruction Manual thoroughly before proceeding with installation, connections ( wiring ), operation, or maintenance and . Inverter Models – Motor Power Rating.

USA National Electrical Code and UK IEE wiring regulations. The rated conditions of operation for the motor are as shown on the nameplate. How the starter circuit on single phase induction motors works (capacitor start and resistive start), and how to reverse them. Not all induction motors can easily be reverse but this one can. The wiring diagram is usually on the cover plate, This one was missing.

I opened it up to find the right coil wires. This is the most versatile tool in my shop. Motor : dual voltage, single phase capacitor start. Resistance of starting winding : ohms Resistance of run windings: ohms each Please follow the recommen. Teco- Westinghouse representative.

The purpose of these instructions is to assist service technicians in making electrical connections to motors , and motors with brakes. Always refer to the motor data plate, the brake nameplate, . Became Westinghouse Canada, Inc.