Leeson brake motor

Load stops automatically when power is turned off. General Purpose Coupler Brakes. The manual release resets automatically. The standard brake is manufactured by Stearns. The brake coil leads are brought into the conduit box of the motor for .

Typically used for replacement on machine tools, textile tools, textile machinery and other equipment with metric dimensions but requiring the high torque and performance of motors designed for use in North America.

LB, Enclosure, TEFC, Lubrication, POLYREX EM.

Fail-safe positive, stop and hold brakemotors. Leeson Electric Corporation, P. Load is stopped automatically when power is turned off. Rigid Base, single phase and three phase electric motors.

Authorized factory distributor.

C-face motor , using the bearing mounted output shaft as an in-line drive shaft. Note: Coupler brake is designed for in-line applications only. Do not apply overhung or side load to brake output shaft.

Note 1: Check face of motor to which brake is to be mounte to be sure NEMA dimensions of.

Cords, Plugs and Grounding Provision modifications: Install grounded line . Brake Kit mounts on fan end of motor . LEESON Three Phase Brakemotors. Explosion Proof, Temp Op Code, FORCE. Use this Motor Trouble-Shooting Chart to diagnose likely causes of motor malfunction such as the motor not starting initially or running then failing restart.

Use where quick response stopping and holding is required in your application. Applications may include conveyors, hoists and packaging equipment.

IEC brake motors also available. In case of power failure, the brake.