How many amps should a blower motor draw

Terry love blower motor amp draw post yours dakota durango forum. It blows cold but not as cold as it should while driving. The answer to the question of the last video.

I have learned in many years of service and repair. Blower Motor Drawing To much amp , shorting out coil on contact - Duration: 2:.

Check Motor Amps - Air Conditioning Repairs near Apex .

This one compares amperage draw of the PSC fan motor to the ECM motor under the same conditions.

The why of the amp draw of furnace blowers. Their use in air handlers and furnaces - Duration: 3:38. How to tell if an Inducer Motor is BAD: Explained Step by Step - Duration: 4:02. Furnace blower motors and condensing fan motors Amp draw are checked to see if they are over Amping or in some cases under Amping.

Use this Motor Trouble-Shooting Chart to diagnose likely causes of motor malfunction such as the motor not starting initially or running then failing restart.

Remove the load from the motor and inspect the amp draw of the motor unloaded. Many Dodge forums tell of this problem. I hope this helped you out, if so let . This means that the current running through the blower motor , and thus is speed is controlled by the resistor value. Where to find the specifications.

This may list the electrical specifications of the blower motor.

It should list the voltage, amperage , . RV Converters and Amp Draw by Mark J. If you need to know exact amperage ratings you can check the data plate on any motors , appliances or electronic equipment you are using. I show how to tell if the compressor is running on an air conditioner by using an ammeter. This video is part of the heating and cooling series of training v. When checking the ohms on motor windings, many technicians have difficulty determining an open winding vs. What does this translate to in real life?

An assumption people often make is that since low voltage increases the amperage draw on motors , then high voltage must reduce the amperage draw and heating of . You find any faults, inaccuracies, or otherwise unacceptable information.

The content in The Engineering ToolBox is copyrighted but can be used with NO WARRANTY or LIABILITY. Important information should always be double checked with alternative sources. All applicable national and local regulations and practices .