Cable heater control valve

This cable runs down to the heater control valve ( down by the spare tire). The original cable had one blue and one yellow paint strip. We will try to tackle any issue you have and make it right for you.

Opens and closes flow of hot water to the heater core.

Installs in the heater inlet hose.

Usually the hose from the intake manifold to the heater core).

By adjusting the cable , the amount of coolant flow could be opened and close depending on the amount of heat desired.

One particular component that really snaps is the heater cable. The heater cable basically controls the heater valve from your dash as you adjust the temperature. Over time, the heater cable snaps, especially if the hole it is inserted has lost its grommet, leaving the heater cable to freely slice itself with the steel opening.

Heater Control Valve , Packard applications, call. The heater control valve allows the flow of coolant through the heater core to be controlle and switched on and off without effecting the operation of the rest of the cooling system. The cable is commonly used on pull to open heater control valves.

As you move the lever on your HVAC control, the cable moves the flap.

This way heat may still be provided even when . This is the clip that hold the cable to the front heater control valve. If you need the cable as well please click here. Midi Heater 4x Outlet 12v New . Parts are just part of what we do. Check the operating cable , and its securing clip,is connected and the flap actually moves.

FREE DELIVERY possible on eligible purchases.

Cable operated bypass heater valve is infinatly adjustable to control the coolant flow and adjust heater temperature. I have weak heat coming out the front driver side and even weaker heat coming from the vents on the front passenger side. The rear seems to be blowing like an Iraqi sandstorm though.

See how to replace and quickly test the heater control valve on BMW Xmdoels. The control valve , depending on the valve position selecte meters the amount of heated coolant that is allowed to enter the heater core, from full off to full flow.