Different speed control methods for different DC shunt and series methods are there. Field Rheostat Control of DC Shunt Motor. This method of speed control is independent of . The different methods of speed control in DC shunt motors are explained below, 1. Flux is produced by the field current.
Thus, the speed control by this method is achieved by control of the field current.
In this method , the magnetic flux due to the field windings is varied in order to vary the speed of the motor.
As the magnetic flux depends on the current flowing through the field winding, it can be varied by varying the current through the field . Along with the shunt field winding an adjustable resistance is connected in . By Field Weakening Method of speed control of DC Motor we can obtain speed above the base speed (Base speed means name plate speed or rated speed of DC Motor). As load torque is assumed constant, the Electromagnetic Torque produced by DC Shunt Motor is more than the load Torque, hence the . V = Terminal Voltage, in volts. Flux Control Method … Speed is inversely proportional to.
Thus by decreasing flux speed can be increased and vice versa. Speed Control Methods Of DC Motor Speed Control Of Shunt Motor 1. To control the flux , a rheostat is added in series with the field winding, as shown in . It makes motor to operate easily. But using field and armature rheostat control . The speed of dc motor can be varied by varying the value of back emf and flux.
Speed of DC motor is directly proportional to the back emf and inversely proportional to the flux. In this article we will discuss about speed control of DC shunt motor.
In this video the DC Shunt motor operation is explained using two methods of speed control. Field control and other one is Armature control . In field control method the speed of the motor gets varied along with variation in field current due to variation of flux induced in field . By continuing this method the flux can be varied and so the speed also varied in DC series motor. In any of the following ways change in flux can be obtained. Tapped Field Control Method and.
R = Combined resistance of the armature and series field and is the flux.
Speed range obtained by flux control technique is between to 1 of rated speed. The max speed is limited by the design of the armature as at high speeds, the armature conductors may get damaged. A Speed control of DC Motor using Buck Converter.
Hence, name flux or field control method. The flux of DC motor can be changed by changing Ish with help .
No comments:
Post a Comment
Note: only a member of this blog may post a comment.