Then turn the ignition on and select reverse gear. Connect the test lamp to earth and probe one terminal, then the other. You can find your fuse locations easily with the illustration.
If the lamp fails to light at all, check the wiring between the fuse and switch.
The car failed the state inspection due to failed back up lights.
It seems like in your case both lights were not working.
I checked the fuse box the bulbs and everything and there was no problem there.
Refer to the diagram on the fuse box cover to locate the correct fuse. Replace the dashboard light fuse if necessary. Note: also check if the tail lights are working.
When the dashboard goes dark you know you are driving without tail lights. What is the rear fog light symbol ? Assuming you get nothing on the running light terminal, check the fuses. With the fuse out you could also try measuring . Starting heater, starter, cold start, stop device, engine compartment, reversing lights , air dryer, 8. Differential lock, level control,.
Relay, Symbol , Fuse , Fuse , Symbol , Circuit breaker, Circuit breaker, Symbol , Resistance, Resistance. Symbol , Closing contact, Closing contact, Symbol , Break contact, Break contact, Symbol . Reversing light switch -F4- :,-. How to change fuses Honda Accord and fix light fuse error.
Other problems can happen with these lights as well. If this happens, take it to YourMechanic, as you are required . For reasons unbeknownst to me my backup lights stopped working. If anyone could shed some light on my dilemma it . Your brake lights are an essential.
You can locate the negative terminal by finding the letters “NEG” on the battery or looking for the negative (-) symbol.
You will not need to disconnect . PND (personal navigation device) power socket.
No comments:
Post a Comment
Note: only a member of this blog may post a comment.