Ecm evaporator fan motor

Food Service Technology Center. A significant breakthrough in energy savings is available for all walk-in coolers and freezers. When you combine Fan Ally evaporator fan motor controllers with your EC motor retrofit program, you will attain approximately additional energy savings from your EC motors during the non-refrigeration portion of the operating . Fans for Commercial Refrigeration.

Electronically Commutated Refrigeration.

ECR) Selection of condenser and evaporator motors and fans for commercial refrigerators, beverage.

Replacement of low-efficiency shaded pole and permanent split capacitor (PSC) evaporator fan drive motors in supermarket refrigerated cases, walk-in freezers and refrigerators, beverage merchandisers, and refrigerated vending machines with highly efficiency electronically commutated permanent magnet (ECPM) motors .

Permanent split capacitor (PSC) motors , often used in conjunction with electronic SCR motors , are somewhat inefficient when used in air control systems because the fan motor noise requires the motor to run at less than a . Traditional fans used to move air across the evaporator and condenser coils typically utylize shaded pole (SP) or permanent split capacitor (PSC) motors , which tend to be extremely inefficient. Watch and learn how to save energy, money, and conserve by swapping of ol. They also help with the efficiency by maintaining the proper air flow (CFM) across components like evaporator coils, heat exchangers, and even condenser coils.

As you know from past postings, air flow is critical to proper operation, but, the use of ECM motor technology, also help raise efficiencies of the . Effortless ordering and convenient delivery. Log-in or register for your pricing. The box was operated with the original shaded pole motors to establish baseline data for comparison.

Then the shaded pole motors were replaced with ECMs, while retaining the original fan blades. Many speed controlled ECM motors offer easy implementation of reversing or two -speed operation. A fan blade requires about 25 . ECM Fan Motor , 10W, 115V, CW (OSE), ELCO.

The 759-ECM controller is designed for walk-in and reach-in coolers and freezers that have continuously variable speed ECM evaporator fan motors , such as the ICE-and the ICE-142. This controller provides maximum efficiency, reduced compressor tun time, reduced product shrinkage, and increased product shelf life . Refrigeration is the primary energy user at many businesses, such as grocery stores and convenience stores.

Installing energy- efficient equipment can help you reduce energy costs and enhance equipment reliability. Efficient evaporator fan motors emit less waste heat into the space, reducing . Used in walk-in coolers and freezers. Automatically reduces evaporator fan speed when compressor is off.

Can be used with 1Vac or 2Vac systems.

Reduces heat load inside coolers. Replacing your existing evaporator and condenser fan motors with ECM motors and controls can greatly improve the energy efficiency of your refrigeration system. Rather than having your evaporator fans run continuously, ECM controllers manage fan speed based on need.

This reduces the amount of energy required to . Upgrade from shaded pole motors to ECMs and save serious energy in your walk -in refrigerators and freezers. FAN MOTOR : SHADED POLE TO ECM. If you've already upgraded from shaded pole motors to . EnergySmart Grocer rebate: $per motor controlled.

Installation of new electronically commutated (EC) evaporator fan motors with existing shaded-pole (SP) evaporator fan motors. Not eligible with any other motor controls.