Wednesday 10 October 2018

Why does my fan wobble

Bill asks, My ceiling fan vibrates and wobbles when turned on high speed. For the less adventurous do -it-yourselfer, balancing kits—which include weights, a test clip, and detailed instructions—are available at home centers. We show you how to adjust and balance your ceiling fan blades to stop the wobble and rattle. Get your fan running smoothly again in minutes.


Ceiling fans often wobble for reasons other than balance.

A high speed wobbly ceiling fan will strike fear in the heart of anyone standing under.

All of the screws had to get tightened down to stop most of the wobbling.

As it turns out after much investigation neither the blades nor the motor were out of balance. In fact the issue that was causing the . A wobbling ceiling fan is lou unsightly, and dangerous if not dealt with properly. Luckily, however, you do not need to call in the handyman to get your fan balanced and happy. Does your fan wobble like this one?


Tev Hyman Castro owner of THCElectrical. Not as clean as other methods but it does work go. HomeChannel If your ceiling fan. Ceilings fans that wobble are not only annoying but can be dangerous. The wobble may also decrease the life of the fan.


Before you do anything else, make sure to clean the fan blades and the motor housing . Make sure the fan is installed correctly and that the wobble is not coming from its ceiling mounting. If it is, then the fan must be reinstalled ASAP. If nothing seems to be wrong or seems to stop the wobble , then try swapping the blades to different locations until the wobble is gone or reduced.


If that still does nothing, then . If it does wobble , next measure the distance between the tips of the blades. Many fans have enough play in the mounting to make some adjustments. Move them as necessary to make the tip-to-tip measurements as close as possible.


This should take out most of the wobble. My five-blade fan is rock-steady . I can prescribe some actions to straighten that out. Sight along the edges of each blade, checking for warping. Vertical Variance (most common, where fan did not wobble before).


First, it must be determined if the fan is rocking or wobbling. Do with any brackets that need adjusting to make sure the unit is balanced and each blade is an equal distance from the ceiling. Turn on the fan and watch for wobbles. If the unit still wobbles , check the balance again. These fans sometimes get used day and night, but sometimes not much at all.


They require cleaning from time to time to keep them running properly and eliminate wobbling blades. They do require maintenance from time to time and these are some things that need to be addressed when ceiling fans . To do this remove the housing where the fan meets the ceiling.

No comments:

Post a Comment

Note: only a member of this blog may post a comment.

Popular Posts