Allen bradley 1336 fault codes

In addition, a reset command can be issued anytime from a. Check fault buffer for fault code. Corrective action must be taken prior to . Users must ensure that installations meet applicable codes and are suitable for the existing conditions. For initial troubleshooting, a programming device is required to read fault codes.

If fault persists, replace main control board.

It does this by measuring the current going out .

If high current draw on all legs, replace motor. Code , Name, Type, Description. If low leg follows motor leads, replace motor.

SP-1 Queue Bad Dest, War, Internal processor error was detected and corrected. SP-1 Queue Bad Tag, War, Internal processor error was . It is intended for use by personnel familiar with the functions of solid-state drive equipment. OR Hardware enable circuitry failed.

This fault can come from many different places at many different times. You need to find out when the fault actually occurs. Fault Display : Enable Hardware.

Does it happen on power up, during deceleration or acceleration, during normal run, or while sitting idle. The voltage that the drive trips on is 285vac input . Verify that cables are securely connected. Another DSI peripheral is using the same DSI port as the adapter.

What is fault and why is it not in my manual? How does the door mount kit work? Are the Elapsed MWh (p009) and Elapsed Run Time (p010) parameters going to reset to zero if the drive is set back to factory defaults? This fault is caused by an excessive motor load on the output of the drive.

This is based off of the motor nameplate full load amps.

Download electronic data sheets for the PowerFlex Drive. Parameter Listing Sheet, An Excel Spreadsheet listing all default values for parameters, and . Allen - Bradley , Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc.