To use the wiring diagram matrix, you will first need to access the product parts manual which will list the corresponding wiring diagram number for the product. Select the highest drawing revision for the most current diagram release. Shroud Assembly: Slides out for easy access.
Barometric Fresh Air Damper: Standard on all units. Allows up to outside fresh air.
Optional ventilation packages available.
Slide complete motor, fan blade, and shroud assembly out the left side of the unit.
An seasoned guy should be able to see. If ambient conditions permit, it can be reconnected to low speed (red wire) for lower sound level. Electric Heat Strips: Features an automatic limit and thermal cut-off safety control.
Bard Manufacturing Company, Inc.
Heater packages are factory or field installed for all 1½ through. Features easy slide-in field assembly with various BTUH outputs. The correct system R-charge is . Actual amount of outdoor air introduced governed by other building systems.
Built-in Circuit Breakers: Standard on . Change condenser fan motor - Duration: 16:48.
Understanding The Electrical Wiring In An Air Conditioner. Effortless ordering and convenient delivery. Log-in or register for your pricing.
Toggle disconnects are standard on all versions of three phase. Low voltage knockout access door.
Remove screws holding fan shroud to condenser and bottom – (9) screws. Condenser air intake grille intake grille access door. Should the discharge pressure fall below 1PSI while running, the condenser fan motor will de-energize until the head pressure builds to 2PSI. Apply “This unit equipped with CMA-control module” label to the inside .
No comments:
Post a Comment
Note: only a member of this blog may post a comment.