This chapter describes warning and information signs used in this manual , which the user should pay attention to. The softstarter shall be installed by authorized personnel only. About the installation and commissioning manual.
This manual contains instructions on how to install and commission the . Thank you for selecting this ABB PSE Softstarter.
Read carefully and be sure to understand all instructions before mounting, connecting and configuring the Softstarter.
This without increasing the overall cost.
The following distances give enough clearance for airflow around the softstarter for suitable cooling. Please note that the values are minimum distances. To have suitable cooling, the softstarter has to be mounted vertically, see picture 2. The manual is available on ABB . If you are already familiar with the SSM starter , you may begin setup procedures immediately by proceeding to Chapter – Installation.
REM) mode, and is controlled from the . See the special designed stop ramp with step down voltage below. System concept with manual motor starters.
All PSR softstarter sizes can easily be . Before the Profibus DP fieldbus can be taken in operation following parameters must be set in the softstarter : ▫. Note that the GSD file contains information about different software versions of the softstarter. A user -friendly and clear display saves you time and resources during both setup and operation. The detachable keypad is standard on all PSTX softstarters.
Contact ABB for more information. The line contactor is not required for the softstarter itself but often used to open if OL trips.
The PSTX softstarter is our newest addition to the softstarter portfolio and is the most complete alternative for any motor starting application. Category Related Guides: ABB improves mining industry efficiency - Softstarter PSTX . Alemão, Inglês, Espanhol, Finlandês, Francês, Italiano, Holandês, Polonês, Português, Russo, .
No comments:
Post a Comment
Note: only a member of this blog may post a comment.