Grab those safety glasses and place them where they belong, protecting your eyes. Disconnect all incoming power from the motor circuit. Como checar el motor de arranque solenoide.
THANKS FOR THIS VERY EDUCATIONAL VID.
When you turn the key, the solenoid engages, using the electrical motor in the starter to.
An you probably had to use all the troubleshooting techniques you acquired and .
A magnetic contractor or starter is uniquely made to produce power to electric motors.
It has an overload relay which is attached physically and electrically, and can detect motor overload which triggers it the supply voltage to open and start. Working through the system Motor to disconnect,overloads, contactor and. Learn how to diagnose an automobile no- start condition by performing simple battery load and voltage drop tests using.
In this video, you will learn how to test your starter real simple before taking your starter to the auto parts.
Solenoi Motor and Overide Clutch testing. How to test an outboard motor starter. This is an Intro to wiring controls and starters.
Motor starters and contactors come in various sizes,voltages and ampreages. Guidelines for Bench- Testing Starter . Bench Testing the Starter : A Step by Step Test. STEP 1: The Circuit Descriptions. Checking Continuity on the Coil.
The tester must have the ability to measure ohms . This one covers testing of the start capacitor.
I have learned in many years of service and repair. Electrical Troubleshooting Simulation software to teach you how to troubleshoot an electrical motor control circuit. At the end is just an example how our software uses realworld workorder system to track student while doing electrical troubleshooting with our simulation . Excellent video and did cover everything except that he did not test the voltage at the solenoid output at the starting moment.
If the contacts were worn out in the solenoid that wouldnt cause the motor to smoke ,im guessing.
No comments:
Post a Comment
Note: only a member of this blog may post a comment.